TDEB Top Bar

Trending
Semiconductor Industry News — The Digital Electronics Blog
Follow Us

TDEB Masthead

The Semiconductor Hub

Semiconductors.  Chips and Systems.  Innovation.

Indexed by leading Search Engines, AI and referenced by Engineers worldwide 500+ Articles 10M+ Pageviews 30+ Reports 50+ Citations

Displaying posts in the categoryFIFO Series

FIFO Series articles

First-Word Fall-Through FIFO: Head Register, Bypass and Valid-Ready Output (FIFO Series, Part 3)

The FIFOs in Part 1 and Part 2 make the reader ask for data first. The consumer raises pop , and the entry appears on rdata a cycle later. Many consumers do not want to work that way. A decoder wants to look at the next header before deciding whether to take it, an arbiter wants to see the request it is about to grant, and a streaming interface with a valid and ready handshake expects the data to be on the wires while valid is high. This is P…

Asynchronous FIFO Design: Gray Pointers, Synchronizers and Safe Flags (FIFO Series, Part 2)

Part 1 built a FIFO where the writer and the reader share one clock. Real chips are rarely that tidy. A PCIe controller runs on a clock recovered from its link, a DMA engine on the fabric clock, a sensor interface on whatever the sensor provides. Wherever two clock domains exchange a stream of data, there is almost always an asynchronous FIFO between them, and it is one of the few places where a small design mistake can pass every simulation an…

Synchronous FIFO Design: Pointers, Full and Empty, and Same-Cycle Push and Pop (FIFO Series, Part 1)

Almost every block on a chip has a FIFO somewhere: between a bus and a DMA engine, inside a network-on-chip router, in front of a memory controller, at the edge of an accelerator. The idea is simple. Data goes in at one end and comes out at the other in the same order. The engineering is in the details: telling a full FIFO from an empty one, deciding what happens when both sides act in the same cycle, and keeping the flag logic off the critical…

Load More No more posts

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Learn more
Ok, Go it!