Displaying posts in the categoryEmerging Technology
Emerging Technology articles
Reliability
Bulk ruthenium conducts about four times worse than bulk copper, and bulk molybdenum about three times worse. Both are still serious candidates for the tightest metal layers of future logic. The reason is that a 10 nm wire does not behave like a block of metal, and a copper wire of that width is only about half copper. This post works through the resistivity against line width with a simple published model, shows which inputs decide the answer…
by
Murugavel Ganesan
November 13, 2026
Through-Glass Vias
Intel put glass core substrates in the headlines in September 2023 and said complete solutions would reach the market in the second half of this decade. More than three years on, a technical note from the IEEE Electronics Packaging Society, updated in November 2025, still says glass has yet to be commercialized. Both statements can be true, and the gap between them is the subject of this post. Glass solves real problems in large AI packages, b…
by
Murugavel Ganesan
November 12, 2026
Standard Cells
Put the nFET directly on top of the pFET and the two no longer need separate floor space. On paper that halves a logic cell. An Intel engineer told IEEE Spectrum in 2023 that an inverter at maximum scaling would be 50 percent of the size of an ordinary CMOS one. Complementary FET, or CFET, is now the expected successor to nanosheets, and imec places its first use at the A7 node. The published cell heights tell a more modest story than that 50 …
by
Murugavel Ganesan
November 09, 2026
Process Technology
Hybrid bonding joins two pieces of silicon with no solder at all. Flat dielectric meets flat dielectric, copper pads meet copper pads, and an anneal makes the joint permanent. That removes the bump, and with it the floor on how close connections can sit. Research wafers are now bonded at a 200 nm pitch, while shipping server processors use about 9 µm. That gap of roughly forty-five times is the subject of this post. Wafer-to-wafer and die-to-w…
by
Murugavel Ganesan
November 05, 2026
Semiconductor Manufacturing
Gallium nitride (GaN) is a wide-bandgap III-V compound semiconductor with a bandgap of about 3.4 eV, three times that of silicon. That wide bandgap gives it a breakdown field roughly ten times higher than silicon, and its AlGaN/GaN heterostructure forms a fast, high-density electron channel without doping. Together these let GaN transistors switch faster, at higher voltage and with lower losses than silicon in chargers, power supplies and RF amp…
by
Murugavel Ganesan
July 01, 2025