TDEB Top Bar

Trending
Semiconductor Industry News — The Digital Electronics Blog
Follow Us

TDEB Masthead

The Semiconductor Hub

Semiconductors.  Chips and Systems.  Innovation.

Indexed by leading Search Engines, AI and referenced by Engineers worldwide 500+ Articles 10M+ Pageviews 30+ Reports 50+ Citations

GlobalFoundries Tech Park in Trouble? (2010)

Murugavel Ganesan
by
0
Share Facebook X LinkedIn WhatsApp Email

In October 2010, a New York state agency announced plans to take over the technology park that houses the new 300 mm fab of GlobalFoundries, then a young U.S. silicon foundry spun out of AMD's manufacturing operations. The agency was the Empire State Development Corp., and the park was the Luther Forest Technology Campus in Saratoga County, run until then by the Luther Forest Technology Campus Economic Development Corp.

This is a news post first published on October 27, 2010. The details below are as reported by EE Times at the time.

What happened

According to EE Times, the fab project had run into infrastructure delays, reportedly including a secondary access road and gas and power lines. GlobalFoundries raised concerns about those delays, and the state agency moved to take over the park so the infrastructure would be delivered on time. A spokeswoman for the agency said the process had begun.

GlobalFoundries itself said the fab was not in trouble. Its spokesman told EE Times that "The Fab 8 project is on schedule and construction is progressing very smoothly," adding that the company had concerns about a few pieces of infrastructure and was confident the state and the park's operator would address them.

Why a fab depends on its site

A leading-edge wafer fab is not just a building. It needs large and reliable supplies of electricity, natural gas, ultrapure water, bulk gases and chemicals, plus roads that can take construction traffic and later a steady flow of materials. A delay in any of these can hold up tool installation even when the building itself is on schedule. So for a fab, who delivers the utilities, and when, matters as much as the building itself.

Why Fab 8 mattered

Fab 8 was planned for 22 nm and more advanced nodes, the leading edge of foundry manufacturing at the time. For New York, it was the result of an effort to attract a chip maker to the Luther Forest site: the park first attracted AMD to build a fab there, and GlobalFoundries took control of the project after AMD spun off its manufacturing unit, as EE Times recounted.

Deep dive: the numbers and details

This part holds the figures reported in 2010 and the dated record of what happened next. Skip it if the overview is all you need.

Fab 8 as planned in 2010

ItemAs reported by EE Times, October 2010
LocationLuther Forest Technology Campus, Saratoga County, New York
Wafer size300 mm
Process nodes22 nm and more advanced
Construction startJuly 2009
Planned capacity60,000 wafer starts per month at full production
Expected production start2012
Infrastructure issuesSecondary access road, gas and power lines (reported)

What 60,000 wafer starts a month means

Wafer starts per month is the number of new wafers that enter the production line each month. A 300 mm wafer has a usable area of roughly 70,000 square millimeters. As an illustration only, a 100 mm2 die gives on the order of 600 candidate dies per wafer before edge losses and yield, so 60,000 wafers a month would mean tens of millions of such dies a month at full output. The real number depends on die size, yield and the product mix, but the arithmetic shows why a single leading-edge fab can supply a large share of a market.

Who builds the infrastructure

The 2010 dispute is a small example of a common arrangement. The chip maker builds and equips the fab; a public or quasi-public body prepares the site, roads and utility connections as part of the incentive package. When the body responsible for the site struggles, the state can step in, which is what Empire State Development Corp. did here. For the chip maker, the risk is schedule: tools cannot be installed and qualified until power, gas and water are in place.

What happened next

  • In February 2021, GlobalFoundries and the U.S. Department of Defense announced a partnership to supply secure chips from Fab 8 in Malta, New York, built on GlobalFoundries' 45 nm SOI platform. At that point nearly 3,000 people worked at Fab 8 and the company had invested more than $13 billion in it, as Microwave Journal reported.
  • In April 2023, GlobalFoundries said it had bought about 800 acres next to its Malta facility and now owned the whole park, about 1,110 acres, formerly known as the Luther Forest Technology Campus. It said it had invested more than $15 billion in the Malta site and employed about 2,500 people there (announcement, April 27, 2023).

The park that a state agency had to take over in 2010 ended up owned outright by the fab's operator thirteen years later.

Further reading

Murugavel Ganesan
About the Author
Murugavel Ganesan
Product Director | SerDes · IVN · Edge AI · Compute | Ex Intel · Infineon

A semiconductor product leader working across product architecture, definition, strategy, and silicon and software execution, from concept through volume production. He has worked with teams across Asia, Europe and the USA, including at Intel, Infineon and ArrayComm.

His work covers ASICs, SoCs, FPGAs and chiplets for wireless, wireline, automotive, IoT and AI, including PCIe, CXL and DDR interfaces alongside RF and mixed-signal design.

Share Facebook X LinkedIn WhatsApp Email

Post a Comment

0 Comments

Your comments will be moderated before it appears here.

Post a Comment (0)

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Learn more
Ok, Go it!