TDEB Top Bar

Trending
Semiconductor Industry News — The Digital Electronics Blog
Follow Us

TDEB Masthead

The Semiconductor Hub

Semiconductors.  Chips and Systems.  Innovation.

Indexed by leading Search Engines, AI and referenced by Engineers worldwide 500+ Articles 10M+ Pageviews 30+ Reports 50+ Citations

VLSI Conference 2008, Hyderabad: Sessions and Papers

Murugavel Ganesan
by
2
Share Facebook X LinkedIn WhatsApp Email

In August 2008 this blog told readers that the complete conference CD of VLSI Design 2008, with its sessions and papers, could be accessed online after a free registration. That site no longer exists. This post now keeps that note as a dated record and explains what the conference was, what it covered, and where its papers can be found today.

The conference in brief

VLSI Design 2008 was the 21st International Conference on VLSI Design, held together with the 7th International Conference on Embedded Systems at the Hyderabad International Convention Centre in Hyderabad, India, from January 4 to 8, 2008. The 2008 edition was the 21st in the series. The conference brings together university researchers and engineers from design centers of global semiconductor and EDA companies.

The archived conference schedule (Internet Archive copy, tentative program dated December 23, 2007) lays out the format:

  • January 4 and 5: eight full-day tutorials (some split into half days), registered separately.
  • January 5 evening: inaugural ceremony and an opening keynote by Dirk Meyer, then President and COO of AMD.
  • January 6 to 8: three days of plenary keynotes, contributed papers in parallel sessions, embedded tutorials, a panel, and an industry forum track.

What was on the program

The tutorial titles give a good picture of what chip designers cared about in early 2008:

  • High-speed I/O signaling and interfaces (ARM Embedded Technologies)
  • Design for manufacturing, design for test, silicon debug and diagnosis (AMD India and Intel)
  • Oversampling analog-to-digital converter design (IIT Madras)
  • Architecture exploration for low power design, and programming automotive ECU networks
  • Memory design and advanced semiconductor technology (IBM)
  • Scan delay testing of nanometer SoCs (Auburn University)
  • Designing reliable systems from unreliable chips (UC Irvine and IBM)
  • OpenSPARC chip multithreading, and implementing processor cores

On January 6 the plenary keynotes came from Walden C. Rhines, CEO of Mentor Graphics, on disruptive methodologies and India's opportunity, and from Alain Artieri of STMicroelectronics on system design challenges for future nanoscale processes. Paper sessions that morning covered fault tolerance, wireless and communication, embedded systems and device technology, followed in the afternoon by testing and DFT, interconnects, architecture and analog design.

Why it still matters to an engineer

Many topics on that 2008 program became everyday design problems a few years later: soft-error tolerant flip-flops, transistor aging (NBTI), process variation monitors, rare-event simulation for SRAM yield, and low power wireless baseband design. Reading a conference program from a given year is a quick way to see which research ideas reached production and which did not.

Where to find the papers today

The proceedings were published by the IEEE Computer Society. The official VLSI Design 2008 proceedings in the IEEE Computer Society Digital Library list the papers, keynotes and front matter; full text needs an IEEE subscription or a per-paper purchase, and many university libraries provide access. The free site mentioned in the original post has gone, so this is now the place to look.

Deep dive: the numbers and details

This part holds the program details and a few examples of papers from the first day. Skip it if the overview is all you need.

Program structure

ItemDetail
Conference21st International Conference on VLSI Design, with the 7th International Conference on Embedded Systems
VenueHyderabad International Convention Centre, Hyderabad, India
DatesTutorials January 4 and 5, 2008; technical program January 6 to 8, 2008
TutorialsEight, run from 9:00 am to 5:00 pm
Talk length for contributed papers20 minutes
Parallel tracks on day oneFive (four paper tracks plus an industry forum)

Source: the archived VLSI Design 2008 conference schedule.

Examples from the first morning's sessions

  • Fault tolerance: a power-efficient approach to fault-tolerant register file design, and a flip-flop architecture tolerant to soft errors and transients from combinational logic.
  • Wireless and communication: a retimed serial Berlekamp-Massey architecture for high-speed Reed-Solomon decoding, and adaptive signal scaling for low power OFDM baseband processors.
  • Embedded systems: processor and instruction set design for wireless sensor networks, and predictable real-time applications on multiprocessor SoCs.
  • Technology: compact modeling of a suspended-gate FET, optimal dual-threshold design in sub-100 nm partially depleted SOI and double-gate technologies, recursive statistical blockade for rare-event SRAM simulation, a paper asking whether NBTI degradation is "a problem or a scare", and on-chip process variation detection using slew-rate monitoring.

Why these themes show up together

At the 65 nm and 45 nm nodes of 2008, three effects were growing at once. Random variation in threshold voltage made SRAM cell failures a rare-event problem: a memory with millions of cells needs each cell to fail extremely rarely, and plain Monte Carlo simulation needs a huge number of runs to see enough failures, which is why methods such as statistical blockade were proposed. Leakage rose sharply with each node, driving dual-threshold and body-biasing work. And smaller charge per node made flip-flops more sensitive to particle strikes, which explains the soft-error papers. The same three themes, variation, leakage and reliability, still shape advanced-node design.

Further reading

Murugavel Ganesan
About the Author
Murugavel Ganesan
Product Director | SerDes · IVN · Edge AI · Compute | Ex Intel · Infineon

A semiconductor product leader working across product architecture, definition, strategy, and silicon and software execution, from concept through volume production. He has worked with teams across Asia, Europe and the USA, including at Intel, Infineon and ArrayComm.

His work covers ASICs, SoCs, FPGAs and chiplets for wireless, wireline, automotive, IoT and AI, including PCIe, CXL and DDR interfaces alongside RF and mixed-signal design.

Share Facebook X LinkedIn WhatsApp Email

Post a Comment

2 Comments

Your comments will be moderated before it appears here.

  1. I only see a d-link router configuration page...

    ReplyDelete
  2. Unfortunately this site is not under the control of "The Digital ELectronics Blog". You may try it when the site is up.

    ReplyDelete
Post a Comment

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Learn more
Ok, Go it!