TDEB Top Bar

Trending
Semiconductor Industry News — The Digital Electronics Blog
Follow Us

TDEB Masthead

The Semiconductor Hub

Semiconductors.  Chips and Systems.  Innovation.

Indexed by leading Search Engines, AI and referenced by Engineers worldwide 500+ Articles 10M+ Pageviews 30+ Reports 50+ Citations

Cool Chips 2009: IEEE Symposium on Low-Power and High-Speed Chips

mg
by
0
Share Facebook X LinkedIn WhatsApp Email

Cool Chips 2009 (COOL Chips XII)
IEEE Symposium on Low-Power and High-Speed Chips
Yokohama, Japan
April 15-17, 2009

COOL Chips is an international symposium, started in 1998, for new low-power and high-speed chips, with a focus on microprocessors and their applications. The twelfth edition, COOL Chips XII, was held in Yokohama on April 15 to 17, 2009, at the Yokohama Joho Bunka Center (Yokohama Media and Communications Center). This post was first published on March 25, 2009 as an event notice and is kept as a dated record.

What the 2009 symposium covered

The organizers' call for contributions (now available only through the Internet Archive) asked for papers on the architecture, design and implementation of chips in three broad areas:

  • Low-power, high-performance processors for multimedia, consumer electronics, mobile, graphics, encryption, robotics, networking and biometrics.
  • New architectures for single-core and multi-core designs, embedded systems, reconfigurable computing, grid, ubiquitous and dependable computing, and wireless.
  • "Cool" software, meaning binary translation, compilers and low-power software techniques.

The 2009 call also had a tenth-anniversary special topic on low-power, high-performance supercomputing. The organizing committee planned to ask IEEE Micro to publish selected papers in a special issue on COOL Chips XII.

Why a "cool chips" conference matters

Power sets hard limits on processor design. A chip can only burn as much power as its package, battery and cooling allow, so every gain in speed has to be paid for with better energy efficiency. COOL Chips brought together the people working on that trade-off: processor architects, circuit designers and compiler writers.

The 2009 program shows three themes that were big at the time:

  • Many-core processors, where many simple cores share the work instead of one very fast core.
  • 3D integration, stacking dies on top of each other and connecting them with through-silicon vias (TSVs), vertical copper connections that pass through the silicon. Short vertical links use less energy than long wires across a large die.
  • Reconfigurable processors, which change their hardware datapath to match the task, aiming at the efficiency of fixed hardware with some of the flexibility of software.

Deep dive: the numbers and details

This part holds the program details, the figures quoted by the speakers and a worked example on 3D yield. Skip it if the overview is all you need.

Keynotes and special sessions

The COOL Chips XII advance program (Internet Archive copy, March 2009) listed:

SessionSpeakerTopic
KeynoteHiroshi Ishiguro, Osaka University and ATRFuture robotics and the chips that robots working in homes and towns will need
KeynoteCisco Systems (ERBU engineering director)Cisco QFP, the Quantum Flow Processor networking chipset
KeynoteMitsumasa Koyanagi, Tohoku UniversityNew 3-D integration technology and 3-D systems
Special sessionYuan Xie, Pennsylvania State UniversityDesigning cool chips using 3D stacking technology
Special sessionHideharu Amano, Keio UniversityLow-power techniques for reconfigurable devices, focusing on dynamically reconfigurable processors

Figures quoted in the abstracts

  • Cisco QFP: described as a fully integrated, programmable networking chipset with 40 cores and 800 million transistors, able to run up to 160 processes at the same time. It powered the data plane of the Cisco ASR 1000 series routers.
  • Reconfigurable processors: Amano's abstract states that dynamically reconfigurable processors achieve 8 to 10 times lower energy than DSPs in comparable technology. The session reviewed operand isolation, reducing reconfiguration, Vdd control, dual Vdd, dual Vth and power gating.
  • 3D integration: Koyanagi's abstract notes that in wafer-to-wafer stacking the overall chip yield falls exponentially with the number of stacked layers. His group proposed "super-chip integration", in which more than a thousand known good dies are aligned and bonded at once by self-assembly.

Worked example: why 3D stacking needs known good dies

The exponential yield loss is easy to see with numbers. Illustrative figures only: if each wafer layer has a die yield of 90% and dies are stacked wafer-to-wafer without testing, a stack is good only if every layer's die is good.

Layers stackedStack yield at 90% per layerStack yield at 80% per layer
281%64%
466%41%
843%17%

Yield is Y to the power n for n layers. Testing dies first and stacking only known good dies (die-to-wafer or die-to-die) breaks that compounding, which is the motivation behind the self-assembly approach in the keynote.

Author schedule

The call for contributions set an extended abstract deadline of January 26, 2009, acceptance notices on March 2, 2009 and final manuscripts on March 16, 2009. Poster abstracts, one page in two-column IEEE format, were due by March 9, 2009.

What happened next

The series has continued. The call for the 29th edition, COOL Chips 29, set it for April 15 to 17, 2026 in Tokyo, under the slightly wider name "IEEE Symposium on Low-Power and High-Speed Chips and Systems". Its topics show how the field moved: AI accelerators from cloud to edge, high-bandwidth and compute-in-memory designs, photonic computing, dense 3D architectures and hardware security.

Share Facebook X LinkedIn WhatsApp Email

Post a Comment

0 Comments

Your comments will be moderated before it appears here.

Post a Comment (0)

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Learn more
Ok, Go it!