TDEB Top Bar

Trending
Semiconductor Industry News — The Digital Electronics Blog
Follow Us

TDEB Masthead

The Semiconductor Hub

Semiconductors.  Chips and Systems.  Innovation.

Indexed by leading Search Engines, AI and referenced by Engineers worldwide 500+ Articles 10M+ Pageviews 30+ Reports 50+ Citations

Intel Announces Multistandard Baseband Chip and Medfield (2011)

Murugavel Ganesan
by
5
Share Facebook X LinkedIn WhatsApp Email

Intel has started production of its Medfield application processor for smartphones and is sending samples to phone manufacturers. Intel also announced a low power, multi-standard baseband processor, samples of which would start shipping in the second half of this year. The new baseband processor will support LTE, a fourth generation, high-speed network technology currently being deployed by carriers, as well as older 3G and 2G technologies. Intel expects to make this chip widely available in the second half of next year.

This post was written in February 2011, at the time of Intel's Mobile World Congress announcements. The news below is kept as written; an explanation of the two kinds of chip involved and a dated record of what happened next follow it.

The news (February 2011)

Medfield is Intel's second smartphone processor. The first, Moorestown, did not have much success in the market due to power consumption too high for smartphones. Medfield and Moorestown are based on Intel's Atom processor. Medfield, which is built on the company's latest 32-nanometer manufacturing process, is expected to be better equipped for smartphones. Smaller in size and consuming less power than the 45-nm Moorestown, the new chip is expected to enter mass production later in the year. Intel has said Medfield-powered smartphones will hit the market this year. The company has not named the manufacturers.

Intel dominates the processor market for PCs, but is playing catch up in the smartphone market, which is ruled today by processors based on the designs of ARM Holdings in the U.K. ARM processors are used by all the major smartphone makers, including Apple, Samsung, LG, HTC, Research In Motion, and others.

Intel's biggest advantage over ARM is in manufacturing. Intel is expected to move to a 22-nm manufacturing process next year, which is when ARM is headed to where Intel is today, 32 nm. Size matters because reducing the size of circuitry on a chip boosts performance and lowers active power consumption. Therefore, Intel in time could produce a higher performing chip that's less expensive than ARM's. ARM is expected to stay on top at least till end of next year.

The LTE chip stems from Intel's acquisition last month of Infineon Technologies' Wireless Solutions business. Intel's strengths in communications before the acquisition were in Wi-Fi and WiMax chips. The acquisition has added 2G, 3G and 4G LTE technologies.

Two chips in every smartphone, in plain words

A smartphone of this era had two main processors:

  • The application processor runs the operating system and apps: the CPU cores, graphics, video decoding, camera processing and memory controller. Medfield was Intel's application processor.
  • The baseband processor (modem) handles the radio link to the cellular network: encoding and decoding the signal, the network protocols for 2G, 3G and LTE, and handover between them. Intel's new multimode chip was a baseband.

Winning in phones meant having both, or partnering for the one you lacked. Intel had the application processor experience from PCs and bought the baseband experience by acquiring Infineon's wireless business.

Why the process node mattered

Moving from 45 nm to 32 nm lets the same circuit be built smaller, with lower capacitance and lower switching energy. For a phone, where the battery sets every limit, that was the argument for Medfield over Moorestown. The original post's point stands as a description of Intel's 2011 plan: its manufacturing lead was its main lever against ARM-based chips.

Deep dive: the numbers and details

This part holds the modem specifications, scaling arithmetic and the dated record of what happened next. Skip it if the overview is all you need.

The multimode LTE platform: XMM 7060

Intel Mobile Communications, the former Infineon Wireless Solutions division, announced the baseband as the XMM 7060 slim modem platform on February 14, 2011. From that release:

ItemXMM 7060
ModesLTE, 3G and 2G (multimode)
LTE standard3GPP Release 8, FDD and TDD, bandwidths up to 20 MHz
LTE category and peak ratesCategory 3: 100 Mbps down, 50 Mbps up
MobilityInter-RAT handover with 3G and 2G
First samplesBy Q3 2011
Volume shipmentsSecond half of 2012

The same release said Intel had completed the acquisition of Infineon's wireless business early in 2011, bringing more than 3,500 employees.

Scaling arithmetic: 45 nm to 32 nm

Ideal area scaling goes with the square of the feature size: (32 / 45)2 is about 0.51, so the same logic needs roughly half the area. Dynamic power is P = a x C x V2 x f, where a is activity, C the switched capacitance, V the supply and f the clock. Smaller transistors and wires reduce C, and each node usually allows a slightly lower V, which counts twice because it is squared. A 10 percent lower supply alone cuts dynamic power by about 19 percent (0.92 = 0.81). Real chips get less than the ideal figures, because wires, analog blocks and I/O do not shrink as well as logic.

Why LTE needed a new modem

LTE uses OFDMA on the downlink and SC-FDMA on the uplink, with MIMO, which is a very different signal chain from 3G's WCDMA. A phone also has to fall back to 3G and 2G wherever LTE coverage ends, so a single-chip multimode modem saves board area and power compared with separate radios. That is why "multimode" was the headline feature.

What happened next

Further reading

Murugavel Ganesan
About the Author
Murugavel Ganesan
Product Director | SerDes · IVN · Edge AI · Compute | Ex Intel · Infineon

A semiconductor product leader working across product architecture, definition, strategy, and silicon and software execution, from concept through volume production. He has worked with teams across Asia, Europe and the USA, including at Intel, Infineon and ArrayComm.

His work covers ASICs, SoCs, FPGAs and chiplets for wireless, wireline, automotive, IoT and AI, including PCIe, CXL and DDR interfaces alongside RF and mixed-signal design.

Share Facebook X LinkedIn WhatsApp Email

Post a Comment

5 Comments

Your comments will be moderated before it appears here.

  1. Appreciate if you can contribute original tutorials!

    ReplyDelete
  2. This comment has been removed by the author.

    ReplyDelete
  3. I have also a useful site related with this........
    Visit Digital Electronics

    ReplyDelete
  4. uk wholesale dropshippersTuesday, April 05, 2011

    It's a really big news that now Intel jumps in communication world and smash the market in the first hit by launching 32nm technology in mobile processors which will highly decrease the power consumption of the smartphones, users really attract by this technology and ready to buy Intel based smartphone. This isn't stop here, Intel describes that they are launching 22nm next year, this will really shock processor manufacturers.

    ReplyDelete
Post a Comment

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Learn more
Ok, Go it!